Maintenance and maintenance method of vacuum laminating machine

2024-01-19 09:24

Vacuum laminator is a very important equipment in PCB lamination process. Its use and maintenance methods are very important to ensure the quality and production efficiency of PCB boards. When using a vacuum laminator, you need to pay attention to the following aspects of maintenance and maintenance methods.
 

1. The correct use of the vacuum laminator is the key to ensure its normal operation. The operator needs to be familiar with the manual of the laminating machine equipment, understand the function and use of each control button and indicator light. Before operation, check the operating status of each component to ensure that the machine is in good working condition. At the same time, it is also necessary to adjust the working parameters of the machine, such as pressure and temperature, according to the requirements of different pressure plates.
 

2. The vacuum laminator should be maintained regularly. Including the various components to clean, remove dust and debris, so as not to affect the normal operation of the machine. In addition, the lubrication system of the machine should be checked regularly to ensure that the quality and quantity of lubricating oil are sufficient to reduce the wear and failure of the machine. At the same time, it is also necessary to check and replace the filter element and filter of the machine to ensure the normal operation of the vacuum system.
 

3. For the life and performance of the vacuum laminator, the following aspects need to be paid attention. The first is temperature control. It is necessary to ensure the temperature stability of the machine during the working process and avoid damage to the machine due to too high or too low temperature. The second is pressure control. The pressure of the machine should be adjusted according to different laminate materials and layers to ensure the stability and quality of the lamination effect. Finally, the control of the vacuum degree, to keep the vacuum degree of the machine within a certain range, to ensure the close adhesion of PCB copper foil and PP.
 

Through the maintenance and maintenance of the above measures, the working efficiency and stability of the vacuum laminator can be improved, its service life can be prolonged, and the quality and performance of the PCB can also be guaranteed. Therefore, when using the vacuum laminator, it is necessary to pay attention to the implementation of the above maintenance and maintenance methods to improve the work effect and production efficiency.

Previous Page

Guangyuan New Material Phase IV 5G High Performance Low Dielectric Electronic Yarn and Extremely Thin Electronic Cloth Project Commencement Ceremony Held

Relationship between PCB Lamination Quality Problem and Copper Clad Laminate

Next Page

Previous Page

Guangyuan New Material Phase IV 5G High Performance Low Dielectric Electronic Yarn and Extremely Thin Electronic Cloth Project Commencement Ceremony Held

Next Page

Relationship between PCB Lamination Quality Problem and Copper Clad Laminate

More news

Jiangsu Shengyi High Frequency Communication Substrate Project Foundation Laying Ceremony Held

Jiangsu Shengyi High Frequency Communication Substrate Project Foundation Laying Ceremony Held

On the morning of December 17, 2017, the groundbreaking ceremony of Jiangsu Shengyi Special Materials Co., Ltd., invested by Guangdong Shengyi Technology Co., Ltd., was held in Nantong Tongzhou National High-tech Development Zone, which is known as "the first state of Tongjiang and Dahai. Liu Shufeng, chairman of Guangdong Shengyi Technology Co., Ltd., Chen Renxi, general manager, Wu Xiaolian, chief operating officer, Zeng Xutang, chairman of Shaanxi Shengyi Technology Co., Ltd., Yang Hui, general manager, Jiao Feng, general manager of Suzhou Shengyi Technology Co., Ltd., Wang Hui, general manager of Changshu Shengyi Technology Co., Ltd., and representatives of the design, supervision, cost and construction units responsible for project construction attended the ceremony.

2024/03/01

LAUFFER high-frequency board press: high-frequency high-speed substrates will usher in high-speed growth in the 5G era.

LAUFFER high-frequency board press: high-frequency high-speed substrates will usher in high-speed growth in the 5G era.

LAUFFER high-frequency board press collects relevant information of 5G high-frequency and high-speed substrates for you on the Internet.

2024/03/01

Jiangxi Jiujiang PCB Project Formed a Complete Industrial Chain

Jiangxi Jiujiang PCB Project Formed a Complete Industrial Chain

In 2017, Jiangxi Jiujiang Economic Development Zone always regarded investment promotion as the "lifeline" of accelerating development, further innovated the investment promotion system and mechanism, changed the investment promotion thinking, adhered to the "two-wheel drive" to promote development, focused on industrial introduction projects, and achieved a detonating effect New breakthroughs in the recruitment of emerging industries. In the whole year, 73 new industrial projects were signed, with a total investment of 63 billion billion yuan, and the proportion of strategic emerging industry projects increased by 37%. In the electronic circuit materials industry, the development zone mainly focuses on Taiwan-funded Dehong fine yarn and the world's second-largest Shengyi copper clad laminate project, resulting in investment in 3 billion yuan Dehong glass fiber yarn and electronic cloth project,

2024/03/01