The purchase of high temperature laminating machine

2022-09-02 11:03

The purchase of high-temperature laminators often affects whether PCB factories can produce high-quality multi-layer PCB boards. But the high temperature laminating machine is expensive, less millions, more than tens of millions. Therefore, many factories do not have their own pressing production lines, often through outward, by his factory OEM. From an objective point of view, OEM increases the production cost to a certain extent, implicitly raises the price of the product, and also increases the delivery time of the product and aggravates the instability of quality. At present, with regard to the manufacture of high multilayer PCB, the lamination method is the most typical manufacturing process, the lamination process is the soul of the lamination method manufacturing process, and the soul of the lamination process is the high temperature laminator. Professional manufacturers often take the key processes in their own hands, invest heavily in the purchase of equipment, and do not take the practice of outward. Just like this, how to choose a heavy purchase of imported high-temperature laminator to ensure the delivery and quality of the product.

The high-temperature laminator Lauffer produced in Germany has a special controller (Siemens PLC and touch screen hardware control) with corresponding programs, which can accurately control the heating and cooling thermal cycle of the hot plate, the hydraulic pressure, and the rise and fall of temperature. The matching cold press can effectively eliminate stress and ensure that the pressed products are smooth and uniform. The combination of cold and hot press can not only ensure the processing accuracy, but also ensure the low failure rate, so that the product after pressing can get better quality and performance. The automated production of printed circuit boards and copper clad laminates places very high demands on lamination technology: factors such as temperature, pressure, and parallelism of the board surface. The high-temperature laminator produced by German Lauffer not only provides customers with specific production line design and optimized pressing process, but also provides advanced lamination concepts and high-quality products.

 

When choosing a high temperature laminator, the first factor to consider is the area of the hot press. To choose a strong compatibility of the area, while considering the way to open the cover, appearance and so on. Use as many machines as possible. After the selection is completed, the installation and commissioning shall be carried out under the guidance of the manufacturer, and the normal production and use shall be carried out.

Previous Page

Agilent Meiwei "high-end packaging substrate and high-end HDI project" started.

Hot plate and steel plate of high temperature laminator

Next Page

Previous Page

Agilent Meiwei "high-end packaging substrate and high-end HDI project" started.

Next Page

Hot plate and steel plate of high temperature laminator

More news

Jiangsu Shengyi High Frequency Communication Substrate Project Foundation Laying Ceremony Held

Jiangsu Shengyi High Frequency Communication Substrate Project Foundation Laying Ceremony Held

On the morning of December 17, 2017, the groundbreaking ceremony of Jiangsu Shengyi Special Materials Co., Ltd., invested by Guangdong Shengyi Technology Co., Ltd., was held in Nantong Tongzhou National High-tech Development Zone, which is known as "the first state of Tongjiang and Dahai. Liu Shufeng, chairman of Guangdong Shengyi Technology Co., Ltd., Chen Renxi, general manager, Wu Xiaolian, chief operating officer, Zeng Xutang, chairman of Shaanxi Shengyi Technology Co., Ltd., Yang Hui, general manager, Jiao Feng, general manager of Suzhou Shengyi Technology Co., Ltd., Wang Hui, general manager of Changshu Shengyi Technology Co., Ltd., and representatives of the design, supervision, cost and construction units responsible for project construction attended the ceremony.

2024/03/01

LAUFFER high-frequency board press: high-frequency high-speed substrates will usher in high-speed growth in the 5G era.

LAUFFER high-frequency board press: high-frequency high-speed substrates will usher in high-speed growth in the 5G era.

LAUFFER high-frequency board press collects relevant information of 5G high-frequency and high-speed substrates for you on the Internet.

2024/03/01

Jiangxi Jiujiang PCB Project Formed a Complete Industrial Chain

Jiangxi Jiujiang PCB Project Formed a Complete Industrial Chain

In 2017, Jiangxi Jiujiang Economic Development Zone always regarded investment promotion as the "lifeline" of accelerating development, further innovated the investment promotion system and mechanism, changed the investment promotion thinking, adhered to the "two-wheel drive" to promote development, focused on industrial introduction projects, and achieved a detonating effect New breakthroughs in the recruitment of emerging industries. In the whole year, 73 new industrial projects were signed, with a total investment of 63 billion billion yuan, and the proportion of strategic emerging industry projects increased by 37%. In the electronic circuit materials industry, the development zone mainly focuses on Taiwan-funded Dehong fine yarn and the world's second-largest Shengyi copper clad laminate project, resulting in investment in 3 billion yuan Dehong glass fiber yarn and electronic cloth project,

2024/03/01